Back to ОБТ Erzay 3DLab(Beta)...

Ошибки программы (3 replies and 2 comments)

Robokinetics
6 месяцев ago
Robokinetics 6 месяцев ago

Здесь можно написать выявленные ошибки и недочёты программы Erzay 3DLab.

Alladyn
5 месяцев ago
Alladyn 5 месяцев ago

При попытке подготовки к печати:

Erzay 3DLab version Beta 0.6.4, build 29.08.2018 13:30
Copyright (C) 2018 Robokinetica

<========================= Start Slicing ==========================>

Start data: 06.09.2018
Start time: 18:55:50
Model input filename: "C:/Users/bodup/Erzay 3DLab/prepared/prepared.stl"
G-Code output filename: "C:/Users/bodup/Erzay 3DLab/prepared/prepared.gcode"
JSON input filename: "resources/definitions/additionally.def.json"
Cura Engine filename: "tools/curaEngine/CuraEngine.exe"

<================= Start command line CuraEngine: =================>

tools/curaEngine/CuraEngine.exe
slice -v -p
-j "resources/definitions/additionally.def.json"

-s ironing_enabled="false"
-s machine_extruder_count="1"
-s support_enable="false"
-s layer_height="0.1"
-s adhesion_type="skirt"
-s default_material_bed_temperature="60"
-s default_material_print_temperature="200"
-s infill_sparse_density="20"
-s infill_line_distance="0"
-s mesh_position_x="0"
-s mesh_position_y="0"

-o "C:/Users/bodup/Erzay 3DLab/prepared/prepared.gcode"
-l "C:/Users/bodup/Erzay 3DLab/prepared/prepared.stl"

<==================== Environment for CuraEngine: ===================>

CURA_ENGINE_SEARCH_PATH=resources/definitions/;resources/extruders/

<====================== Cura Engine output: =======================>

Cura_SteamEngine version 3.4.0
Copyright (C) 2018 Ultimaker

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program. If not, see <http://www.gnu.org/licenses/&gt;.
Loading resources/definitions/additionally.def.json...
[WARNING] Setting an unregistered setting ironing_enabled to false
[WARNING] Setting an unregistered setting machine_extruder_count to 1
[WARNING] Setting an unregistered setting support_enable to false
[WARNING] Setting an unregistered setting layer_height to 0.1
[WARNING] Setting an unregistered setting adhesion_type to skirt
[WARNING] Setting an unregistered setting default_material_bed_temperature to 60
[WARNING] Setting an unregistered setting default_material_print_temperature to 200
[WARNING] Setting an unregistered setting infill_sparse_density to 20
[WARNING] Setting an unregistered setting infill_line_distance to 0
[WARNING] Setting an unregistered setting mesh_position_x to 0
[WARNING] Setting an unregistered setting mesh_position_y to 0
Loading C:/Users/bodup/Erzay 3DLab/prepared/prepared.stl from disk...
[ERROR] Trying to retrieve unregistered setting with no value given: 'mesh_rotation_matrix'

Robokinetics
4 месяца ago

Добрый день, спасибо за выявленную ошибку!
Напишите марку и модель вашей 3D машины, в следующем обновлении мы добавим его в нашу базу. Ошибка связана с тем что вы выбрали пункт "Other Setings", в разделе выборе принтеров, в данный момент эта функция не поддерживается, в ближайшее время мы это исправим. Сейчас мы рекомендуем выбрать любую другую машину из базы, близкую к параметрам вашей, и адаптировать её.
С уважением, команда Robokinetics!

stopor1958@gmail.com
2 месяца ago
stopor1958@gmail.com 2 месяца ago

После подключения принтер не реагирует на команды и выдает:
11:52:23 Подключено к "COM3", скорость: 115200 бод
11:52:23 �NP|4n6HJPON6��Z�j%�J�on|.>(� Ja8�4mn�X'�H�X�J�^���m�7��%I�'
11:52:24 �N�;6j_>+��X7�(^�=�'J�%�]�MX�J�{�}�M`�Yp|] X6�X.l�p|]�f�J�J�x��HH6v�J�J%�J�%�J%�J�J�
11:52:24 :6H^�}�$p|4
11:52:24 �J�J�J�JJ�J�J�*:&� ^>h]�Zf�J�Z�K�K�K�K�+^>H]�j�Kq?.aKp�..aKka�.a+'J�J�ZXJ�AXJ�QHJP|POa�6}�&�O6�}�&��/MoY�&~\y�{&>�K&��+J�J�I�j�J�J�(J�(J�8�:
11:52:24 rM� ]f�J�J�x�]N&�:'J�k�I�jN�x�
11:52:24 ao�Hk�6~�^Y�L>o��My�Y�a&a>H6y�nH+XN>yp|��J�J�%�J�Zy�%�J�XJ�I�jN�x�:636L&N&^F�J�[�(%M0�{�(J%H*'
11:53:32 Процесс слайсинга неожиданно завершился!
11:53:32 Лог сласера: "C:/Users/stopo/Erzay 3DLab/log/curaEngine/last_slicing.log"
11:53:32 Что-то пошло не так!
11:53:32 Ошибка слайсера
11:57:18 Аварийная остановка!
11:57:18 Подключено к "COM3", скорость: 115200 бод
11:57:19 �np|$n6H5JpON6��Z�z%�J�onl(�Jq� $}~�H�H�x�J�~��6�]�7��%Y�
11:57:19 �^�67jO>��H7�(^�=�J��m�MX�J�k�}�M`�YP|2MX;6�H.l�p|$]�F�J�J�X��HH6f�J�J%�J�%�J%�J�J�:':&X^�}�4P|4
11:57:19 �J�J�J�JJ�J�J�*:&�+^>hm�jF�J�Z�K�K�K�K�N>h}�z�Kq?aKP�.aKKa�.a+J�J�ZHJ�aHJ�AHJp|@_a�6M�6�6O6�M�6�6�MY�&~\y�k6>�K6��+J�Z�I�j�J�(J�8J�J��*'bM�+}f�J�J�H�:]N6� *J�[�I�jN�H�* &a�XK.�~�^y�\>��My�Y�a&a>HY�nXX^'>Yp|��Z�J�%�J�ZI�5�J�HJ�I�jN�H�:66|6N&^v�J�{�(5M�K�(j%H*
11:57:19 zO6�v�J�Z�Z�5 �-�*

Sanick
2 месяца ago

Вероятнее всего, Вы выбрали неправильную скорость подключения к Вашему принтеру. Попробуйте выбрать 250000 бод

stopor1958@gmail.com
2 месяца ago
stopor1958@gmail.com 2 месяца ago

Лог программы:
ООО «Робокинетка»

Erzay 3DLab Beta 0.8.1
<============================ Информация ==========================>

Дата начала: 11.11.2018
Время начала: 11:56:51
Входные файлы моделей:
C:/Users/stopo/OneDrive/Vesala.stl
Выходной G-код файл:
C:/Users/stopo/Erzay 3DLab/prepared/prepared.gcode

<======================= Журнал слайсинга =========================>

Cura_SteamEngine version 3.5.0
Copyright (C) 2018 Ultimaker

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program. If not, see <http://www.gnu.org/licenses/&gt;.
Loading resources/definitions/kossel_mini.def.json...
Loading resources/definitions/fdmprinter.def.json...
Loading resources/extruders//kossel_mini_extruder_0.def.json...
Loading resources/definitions/fdmextruder.def.json...
Loading C:/Users/stopo/Erzay 3DLab/prepared/prepared_0.stl from disk...
loading 'C:/Users/stopo/Erzay 3DLab/prepared/prepared_0.stl' took 0.015 seconds
Loaded from disk in 0.031s
[WARNING] -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s mesh_position_z="0" -s mesh_position_x="0" -s center_object="false" -s bridge_fan_speed_3="0" -s bridge_skin_density_3="80" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s bridge_skin_speed_2="25" -s bridge_skin_speed="15" -s bridge_wall_material_flow="50" -s bridge_wall_speed="15" -s bridge_skin_density="100" -s bridge_wall_coast="100" -s bridge_skin_support_threshold="50" -s bridge_settings_enabled="false" -s wall_overhang_speed_factor="100" -s wall_overhang_angle="90" -s adaptive_layer_height_threshold="200" -s adaptive_layer_height_variation_step="0.01" -s wireframe_nozzle_clearance="1" -s wireframe_straight_before_down="20" -s jerk_enabled="false" -s acceleration_support_roof="3000" -s prime_tower_enable="false" -s acceleration_wall_x="3000" -s max_feedrate_z_override="0" -s skirt_brim_minimal_length="250" -s conical_overhang_angle="50" -s skin_no_small_gaps_heuristic="true" -s speed_wall_x="60" -s speed_wall_0="30" -s speed_infill="60" -s switch_extruder_retraction_amount="20" -s support_conical_angle="30" -s retraction_retract_speed="25" -s machine_nozzle_heat_up_speed="2" -s extruder_prime_pos_x="0" -s material_surface_energy="100" -s machine_max_jerk_e="5" -s jerk_wall_0="20" -s jerk_ironing="20" -s retraction_extra_prime_amount="0" -s cross_infill_pocket_size="2" -s material_print_temperature_layer_0="215" -s material_print_temperature="210" -s jerk_topbottom="20" -s draft_shield_height="10" -s infill_support_angle="40" -s flow_rate_extrusion_offset_factor="100" -s extruder_prime_pos_abs="false" -s top_skin_preshrink="0" -s adhesion_extruder_nr="0" -s bottom_skin_preshrink="0" -s infill_before_walls="true" -s gradual_infill_steps="0" -s adaptive_layer_height_enabled="false" -s support_tower_roof_angle="65" -s skin_overlap_mm="0.02" -s speed_equalize_flow_enabled="false" -s mold_angle="40" -s machine_start_gcode="G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 ;Home all axes (max endstops)
G1 Z15.0 F9000 ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 3mm of feed stock
G92 E0 ;zero the extruded length again
G1 F9000
;Put printing message on LCD screen
M117 Printing..." -s wireframe_up_half_speed="0.3" -s machine_firmware_retract="false" -s infill_overlap_mm="0.04" -s outer_inset_first="false" -s raft_interface_line_spacing="0.9" -s infill_sparse_thickness="0.1" -s infill_wall_line_count="0" -s meshfix_keep_open_polygons="false" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="false" -s infill_angles="[ ]" -s wireframe_roof_drag_along="0.8" -s material_final_print_temperature="195" -s speed_slowdown_layers="2" -s support_bottom_line_width="0.4" -s zig_zaggify_infill="false" -s retraction_amount="6.5" -s z_seam_corner="z_seam_corner_inner" -s machine_max_jerk_z="0.4" -s infill_wipe_dist="0.04" -s ironing_pattern="zigzag" -s ironing_only_highest_layer="false" -s retraction_extrusion_window="4.5" -s infill_mesh="false" -s retraction_enable="true" -s skin_outline_count="1" -s acceleration_enabled="false" -s skin_alternate_rotation="false" -s retraction_min_travel="1.5" -s speed_ironing="20" -s z_seam_relative="false" -s jerk_skirt_brim="20" -s z_seam_y="100" -s optimize_wall_printing_order="false" -s acceleration_travel_layer_0="3000" -s layer_height="0.2" -s sub_div_rad_add="0.4" -s machine_max_feedrate_x="500" -s material_adhesion_tendency="10" -s support_roof_line_width="0.4" -s machine_max_feedrate_y="500" -s meshfix_maximum_resolution="0.01" -s machine_max_acceleration_y="9000" -s machine_show_variants="false" -s gradual_infill_step_height="1.5" -s machine_nozzle_temp_enabled="true" -s gradual_support_infill_step_height="1" -s alternate_extra_perimeter="false" -s material_flow_layer_0="100" -s machine_nozzle_size="0.4" -s machine_heat_zone_length="16" -s ironing_flow="10" -s ooze_shield_dist="2" -s support_zag_skip_count="5" -s cutting_mesh="false" -s connect_infill_polygons="true" -s machine_endstop_positive_direction_y="false" -s roofing_layer_count="0" -s material_shrinkage_percentage="0" -s wireframe_drag_along="0.6" -s wall_line_width_0="0.4" -s machine_max_jerk_xy="20" -s roofing_extruder_nr="-1" -s switch_extruder_retraction_speed="20" -s gantry_height="1e+011" -s ironing_inset="0.35" -s layer_0_z_overlap="0.22" -s meshfix_maximum_travel_resolution="0.02" -s wireframe_bottom_delay="0" -s raft_smoothing="5" -s wall_min_flow="0" -s draft_shield_height_limitation="full" -s support_infill_angle="0" -s machine_filament_park_distance="16" -s extruder_prime_pos_z="0" -s acceleration_ironing="3000" -s machine_nozzle_cool_down_speed="2" -s material_bed_temp_prepend="true" -s travel_compensate_overlapping_walls_0_enabled="true" -s acceleration_wall_0="3000" -s retraction_prime_speed="25" -s material_print_temp_prepend="true" -s jerk_print_layer_0="20" -s machine_buildplate_type="glass" -s machine_width="170" -s top_layers="8" -s material_bed_temperature_layer_0="100" -s machine_max_acceleration_e="10000" -s support_bottom_height="1" -s bridge_skin_density_2="75" -s machine_nozzle_id="unknown" -s layer_height_0="0.3" -s support_conical_min_width="5" -s limit_support_retractions="true" -s acceleration_travel="5000" -s raft_surface_jerk="20" -s multiple_mesh_overlap="0.15" -s fill_outline_gaps="false" -s infill_line_width="0.4" -s adaptive_layer_height_variation="0.1" -s meshfix_extensive_stitching="false" -s top_bottom_extruder_nr="-1" -s material_diameter="2.85" -s machine_max_acceleration_z="100" -s support_bottom_pattern="concentric" -s machine_depth="170" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s machine_height="200" -s support_connect_zigzags="true" -s brim_outside_only="true" -s speed_support_infill="60" -s ironing_enabled="false" -s machine_extruder_count="1" -s retract_at_layer_change="false" -s min_skin_width_for_expansion="2.24" -s extruders_enabled_count="1" -s infill_line_distance="4" -s machine_end_gcode="M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G28 ;Home all axes (max endstops)
M84 ;steppers off
G90 ;absolute positioning" -s skirt_brim_line_width="0.4" -s brim_line_count="20" -s speed_support_roof="40" -s wireframe_top_delay="0" -s acceleration_skirt_brim="3000" -s acceleration_topbottom="3000" -s material_extrusion_cool_down_speed="0.7" -s infill_pattern="grid" -s speed_equalize_flow_max="150" -s coasting_speed="90" -s machine_steps_per_mm_x="50" -s machine_heated_bed="true" -s machine_steps_per_mm_y="50" -s jerk_travel="30" -s machine_use_extruder_offset_to_offset_coords="true" -s machine_max_feedrate_z="5" -s retraction_hop="1" -s machine_max_feedrate_e="2.99792e+011" -s travel_compensate_overlapping_walls_x_enabled="true" -s cool_fan_enabled="true" -s support_enable="false" -s bridge_skin_material_flow="60" -s speed_travel_layer_0="60" -s wireframe_roof_outer_delay="0.2" -s top_skin_expand_distance="2.8" -s speed_prime_tower="60" -s machine_endstop_positive_direction_z="true" -s acceleration_print_layer_0="3000" -s default_material_bed_temperature="100" -s speed_roofing="25" -s material_standby_temperature="150" -s infill_extruder_nr="-1" -s skin_angles="[ ]" -s jerk_infill="20" -s acceleration_infill="3000" -s raft_base_acceleration="3000" -s cool_min_speed="10" -s material_initial_print_temperature="200" -s layer_start_y="0" -s wireframe_flow_connection="100" -s slicing_tolerance="middle" -s machine_max_acceleration_x="9000" -s travel_avoid_distance="0.625" -s skin_line_width="0.4" -s raft_interface_jerk="20" -s infill_support_enabled="false" -s machine_shape="elliptic" -s speed_travel="120" -s alternate_carve_order="true" -s spaghetti_inset="0.2" -s cool_fan_full_layer="2" -s minimum_polygon_circumference="1" -s retraction_count_max="90" -s magic_fuzzy_skin_point_dist="0.8" -s material_bed_temp_wait="true" -s bottom_layers="6" -s machine_feeder_wheel_diameter="10" -s material_bed_temperature="100" -s prime_tower_line_width="0.4" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wall_0_extruder_nr="-1" -s retraction_hop_after_extruder_switch="true" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s material_print_temp_wait="true" -s wall_line_count="2" -s machine_minimum_feedrate="0" -s machine_name="Unknown" -s wall_line_width_x="0.4" -s raft_surface_line_width="0.4" -s wall_0_wipe_dist="0.2" -s machine_nozzle_expansion_angle="45" -s top_bottom_pattern="lines" -s support_line_width="0.4" -s machine_acceleration="4000" -s wall_0_inset="0" -s machine_center_is_zero="true" -s smooth_spiralized_contours="true" -s raft_base_line_width="0.8" -s connect_skin_polygons="false" -s support_top_distance="0.1" -s machine_min_cool_heat_time_window="50" -s spaghetti_infill_extra_volume="0" -s xy_offset="0" -s carve_multiple_volumes="true" -s ironing_line_spacing="0.1" -s skirt_brim_speed="30" -s material_flow="100" -s xy_offset_layer_0="0" -s jerk_wall_x="20" -s jerk_roofing="20" -s support_bottom_distance="0.1" -s prime_tower_size="20" -s spaghetti_infill_stepped="true" -s jerk_support_infill="20" -s support_supported_skin_fan_speed="100" -s jerk_support_roof="20" -s switch_extruder_prime_speed="20" -s travel_retract_before_outer_wall="false" -s jerk_prime_tower="20" -s start_layers_at_same_position="false" -s bridge_wall_min_length="5" -s retraction_combing="all" -s retraction_combing_max_distance="0" -s support_bottom_stair_step_height="0.3" -s travel_avoid_other_parts="true" -s wall_x_extruder_nr="-1" -s travel_avoid_supports="false" -s layer_start_x="0" -s retraction_hop_enabled="false" -s retraction_hop_only_when_collides="false" -s default_material_print_temperature="210" -s wireframe_fall_down="0.5" -s wireframe_enabled="false" -s cool_min_layer_time_fan_speed_max="10" -s ooze_shield_angle="60" -s cool_lift_head="false" -s fill_perimeter_gaps="everywhere" -s support_infill_extruder_nr="0" -s speed_support_bottom="40" -s support_extruder_nr_layer_0="0" -s skirt_line_count="1" -s filter_out_tiny_gaps="true" -s support_tree_branch_diameter_angle="5" -s raft_surface_line_spacing="0.4" -s top_bottom_pattern_0="lines" -s support_roof_extruder_nr="0" -s jerk_travel_layer_0="20" -s support_bottom_extruder_nr="0" -s support_angle="50" -s support_pattern="zigzag" -s bridge_enable_more_layers="true" -s support_wall_count="1" -s draft_shield_dist="10" -s raft_interface_fan_speed="0" -s support_skip_some_zags="false" -s support_line_distance="2.66" -s cool_min_layer_time="5" -s wireframe_roof_inset="3" -s initial_layer_line_width_factor="100" -s support_xy_distance="0.7" -s support_xy_overrides_z="z_overrides_xy" -s zig_zaggify_support="false" -s support_bottom_stair_step_width="5" -s acceleration_prime_tower="3000" -s support_infill_sparse_thickness="0.1" -s mold_width="5" -s gradual_support_infill_steps="0" -s support_roof_enable="false" -s bridge_skin_speed_3="15" -s support_bottom_enable="false" -s support_roof_height="1" -s support_interface_skip_height="0.3" -s support_roof_line_distance="0.4" -s support_tree_branch_diameter="2" -s support_bottom_line_distance="0.4" -s support_roof_pattern="concentric" -s support_fan_enable="false" -s wireframe_roof_fall_down="2" -s print_sequence="all_at_once" -s support_use_towers="true" -s prime_tower_wipe_enabled="true" -s support_tower_diameter="3" -s support_join_distance="2" -s remove_empty_first_layers="true" -s support_minimal_diameter="3" -s infill_mesh_order="0" -s cool_fan_speed_max="100" -s support_mesh_drop_down="true" -s bottom_skin_expand_distance="2.8" -s prime_blob_enable="true" -s extruder_prime_pos_y="0" -s adhesion_type="raft" -s bridge_fan_speed="100" -s skirt_gap="3" -s infill_enable_travel_optimization="false" -s raft_margin="15" -s prime_tower_position_x="200" -s cool_fan_speed_0="0" -s raft_airgap="0.3" -s support_mesh="false" -s support_xy_distance_overhang="0.2" -s raft_surface_thickness="0.1" -s prime_tower_flow="100" -s raft_interface_thickness="0.15" -s z_seam_type="sharpest_corner" -s raft_interface_line_width="0.7" -s raft_base_thickness="0.3" -s raft_base_line_spacing="1.6" -s prime_tower_position_y="200" -s wireframe_printspeed_down="5" -s z_seam_x="100" -s raft_surface_speed="20" -s infill_multiplier="1" -s raft_interface_speed="15" -s support_offset="0.2" -s raft_base_speed="15" -s raft_surface_acceleration="3000" -s speed_print_layer_0="30" -s machine_endstop_positive_direction_x="false" -s raft_interface_acceleration="3000" -s raft_base_jerk="20" -s raft_surface_fan_speed="0" -s support_tree_enable="false" -s cool_fan_speed_min="100" -s prime_tower_circular="true" -s raft_surface_layers="2" -s prime_tower_min_volume="6" -s meshfix_union_all="true" -s acceleration_support_infill="3000" -s meshfix_union_all_remove_holes="false" -s machine_steps_per_mm_e="1600" -s mold_enabled="false" -s mold_roof_height="0.5" -s magic_mesh_surface_mode="normal" -s anti_overhang_mesh="false" -s relative_extrusion="false" -s support_tree_angle="40" -s wall_min_flow_retract="false" -s support_tree_branch_distance="1" -s support_tree_collision_resolution="0.4" -s support_tree_wall_count="1" -s roofing_line_width="0.4" -s acceleration_support_bottom="3000" -s roofing_pattern="lines" -s infill_offset_y="0" -s roofing_angles="[ ]" -s mesh_position_y="0" -s material_flow_dependent_temperature="false" -s conical_overhang_enabled="false" -s draft_shield_enabled="false" -s coasting_min_volume="0.8" -s spaghetti_infill_enabled="false" -s spaghetti_max_infill_angle="10" -s speed_topbottom="30" -s magic_spiralize="false" -s spaghetti_max_height="2" -s spaghetti_flow="20" -s bridge_skin_material_flow_2="100" -s machine_nozzle_head_distance="3" -s support_conical_enabled="false" -s support_initial_layer_line_distance="2.66" -s jerk_support_bottom="20" -s magic_fuzzy_skin_thickness="0.3" -s acceleration_roofing="3000" -s flow_rate_max_extrusion_offset="0" -s wireframe_height="3" -s ooze_shield_enabled="false" -s coasting_enable="false" -s wireframe_printspeed_bottom="5" -s wireframe_printspeed_up="5" -s raft_base_fan_speed="0" -s wireframe_printspeed_flat="5" -s wireframe_flow_flat="100" -s wireframe_flat_delay="0.1" -s machine_steps_per_mm_z="50" -s wireframe_top_jump="0.6" -s coasting_volume="0.064" -s wireframe_strategy="compensate" -g -e0 -s material_standby_temperature="230" -s material_shrinkage_percentage="90" -s material_print_temperature_layer_0="240" -s material_print_temperature="240" -s material_initial_print_temperature="240" -s material_final_print_temperature="240" -s extruder_prime_pos_x="0" -s machine_extruder_start_pos_abs="false" -s machine_extruder_start_pos_y="0" -s extruder_nr="0" -s machine_nozzle_id="unknown" -s machine_nozzle_offset_x="0" -s cool_fan_speed="30" -s cool_fan_speed_max="30" -s machine_nozzle_size="0.4" -s machine_extruder_start_pos_x="0" -s machine_nozzle_offset_y="0" -s default_material_print_temperature="240" -s mesh_rotation_matrix="[[2.38419e-07,0,1], [1,1.19209e-07,-1.19209e-07], [0,1,1.19209e-07]]" -s machine_extruder_end_pos_x="0" -s material_diameter="1.75" -s machine_extruder_end_pos_y="0" -s extruder_prime_pos_z="0" -s material_surface_energy="70" -s machine_extruder_end_pos_abs="false" -s extruder_prime_pos_y="0" -s cool_fan_speed_min="10" -s material_adhesion_tendency="0" -e0 -l "0" -s mesh_position_z="-89" -s mesh_position_y="-100" -s mesh_position_x="-35" -s extruder_nr="0"
Progress: start accomplished in 0.000s
Starting slice...
Slicing model...
slice of mesh took 0.047 seconds
slice make polygons took 0.016 seconds
Progress:slice:1:1 0.018531%
Progress: slice accomplished in 0.063s
Starting layerparts...
Progress:layerparts:1:1 0.023922%
Progress: layerparts accomplished in 0.016s
Starting inset+skin...
Progress:inset+skin:6:100 0.039075%
Progress:inset+skin:6:100 0.039075%
Progress:inset+skin:7:100 0.041601%
Progress:inset+skin:7:100 0.041601%
Progress:inset+skin:8:100 0.044126%
Progress:inset+skin:8:100 0.044126%
Progress:inset+skin:9:100 0.046652%
Progress:inset+skin:9:100 0.046652%
Progress:inset+skin:10:100 0.049177%
Progress:inset+skin:10:100 0.049177%
Progress:inset+skin:11:100 0.051703%
Progress:inset+skin:11:100 0.051703%
Progress:inset+skin:12:100 0.054228%
Progress:inset+skin:13:100 0.056754%
Progress:inset+skin:13:100 0.056754%
Progress:inset+skin:13:100 0.056754%
Progress:inset+skin:14:100 0.059279%
Progress:inset+skin:14:100 0.059279%
Progress:inset+skin:14:100 0.059279%
Progress:inset+skin:15:100 0.061805%
Progress:inset+skin:15:100 0.061805%
Progress:inset+skin:15:100 0.061805%
Progress:inset+skin:15:100 0.061805%
Progress:inset+skin:16:100 0.064330%
Progress:inset+skin:16:100 0.064330%
Progress:inset+skin:16:100 0.064330%
Progress:inset+skin:17:100 0.066856%
Progress:inset+skin:17:100 0.066856%
Progress:inset+skin:18:100 0.069381%
Progress:inset+skin:18:100 0.069381%
Progress:inset+skin:19:100 0.071907%
Progress:inset+skin:20:100 0.074432%
Progress:inset+skin:20:100 0.074432%
Progress:inset+skin:21:100 0.076958%
Progress:inset+skin:21:100 0.076958%
Progress:inset+skin:22:100 0.079483%
Progress:inset+skin:22:100 0.079483%
Progress:inset+skin:22:100 0.079483%
Progress:inset+skin:23:100 0.082009%
Progress:inset+skin:23:100 0.082009%
Progress:inset+skin:23:100 0.082009%
Progress:inset+skin:24:100 0.084534%
Progress:inset+skin:27:100 0.092111%
Progress:inset+skin:27:100 0.092111%
Progress:inset+skin:28:100 0.094636%
Progress:inset+skin:28:100 0.094636%
Progress:inset+skin:29:100 0.097162%
Progress:inset+skin:29:100 0.097162%
Progress:inset+skin:30:100 0.099687%
Progress:inset+skin:31:100 0.102213%
Progress:inset+skin:31:100 0.102213%
Progress:inset+skin:31:100 0.102213%
Progress:inset+skin:33:100 0.107264%
Progress:inset+skin:34:100 0.109789%
Progress:inset+skin:35:100 0.112315%
Progress:inset+skin:36:100 0.114840%
Progress:inset+skin:38:100 0.119891%
Progress:inset+skin:38:100 0.119891%
Progress:inset+skin:40:100 0.124943%
Progress:inset+skin:40:100 0.124943%
Progress:inset+skin:41:100 0.127468%
Progress:inset+skin:41:100 0.127468%
Progress:inset+skin:43:100 0.132519%
Progress:inset+skin:44:100 0.135045%
Progress:inset+skin:45:100 0.137570%
Progress:inset+skin:46:100 0.140096%
Progress:inset+skin:48:100 0.145147%
Progress:inset+skin:49:100 0.147672%
Progress:inset+skin:51:100 0.152723%
Progress:inset+skin:52:100 0.155249%
Progress:inset+skin:53:100 0.157774%
Progress:inset+skin:55:100 0.162825%
Progress:inset+skin:56:100 0.165351%
Progress:inset+skin:57:100 0.167876%
Progress:inset+skin:58:100 0.170402%
Progress:inset+skin:59:100 0.172927%
Progress:inset+skin:61:100 0.177978%
Progress:inset+skin:62:100 0.180504%
Progress:inset+skin:63:100 0.183029%
Progress:inset+skin:64:100 0.185555%
Progress:inset+skin:65:100 0.188080%
Progress:inset+skin:67:100 0.193131%
Progress:inset+skin:68:100 0.195657%
Progress:inset+skin:69:100 0.198182%
Progress:inset+skin:70:100 0.200708%
Progress:inset+skin:71:100 0.203233%
Progress:inset+skin:72:100 0.205759%
Progress:inset+skin:72:100 0.205759%
Progress:inset+skin:73:100 0.208284%
Progress:inset+skin:74:100 0.210810%
Progress:inset+skin:75:100 0.213336%
Progress:inset+skin:77:100 0.218387%
Progress:inset+skin:78:100 0.220912%
Progress:inset+skin:78:100 0.220912%
Progress:inset+skin:80:100 0.225963%
Progress:inset+skin:82:100 0.231014%
Progress:inset+skin:83:100 0.233540%
Progress:inset+skin:84:100 0.236065%
Progress:inset+skin:85:100 0.238591%
Progress:inset+skin:87:100 0.243642%
Progress:inset+skin:88:100 0.246167%
Progress:inset+skin:89:100 0.248693%
Progress:inset+skin:90:100 0.251218%
Progress:inset+skin:91:100 0.253744%
Progress:inset+skin:93:100 0.258795%
Progress:inset+skin:93:100 0.258795%
Progress:inset+skin:94:100 0.261320%
Progress:inset+skin:95:100 0.263846%
Progress:inset+skin:96:100 0.266371%
Progress:inset+skin:96:100 0.266371%
Progress:inset+skin:98:100 0.271422%
Progress:inset+skin:98:100 0.271422%
Progress:inset+skin:1:1 0.276473%
Layer count: 110
Progress: inset+skin accomplished in 0.203s
Starting support...
Processing platform adhesion
Progress: support accomplished in 0.172s
Starting export...
Multithreading GcodeLayerThreader with 2 threads.
Progress:export:1:110 0.460810%
Progress:export:2:110 0.465753%
Progress:export:3:110 0.470697%
Progress:export:4:110 0.475640%
Progress:export:5:110 0.480584%
Progress:export:6:110 0.485527%
Progress:export:7:110 0.490471%
Progress:export:8:110 0.495414%
Progress:export:9:110 0.500358%
Progress:export:10:110 0.505301%
Progress:export:11:110 0.510245%
Progress:export:12:110 0.515188%
Progress:export:13:110 0.520132%
Progress:export:14:110 0.525075%
Progress:export:15:110 0.530019%
Progress:export:16:110 0.534962%
Progress:export:17:110 0.539906%
Progress:export:18:110 0.544849%
Progress:export:19:110 0.549792%
Progress:export:20:110 0.554736%
Progress:export:21:110 0.559679%
Progress:export:22:110 0.564623%
Progress:export:23:110 0.569566%
Progress:export:24:110 0.574510%
Progress:export:25:110 0.579453%
Progress:export:26:110 0.584397%
Progress:export:27:110 0.589340%
Progress:export:28:110 0.594284%
Progress:export:29:110 0.599227%
Progress:export:30:110 0.604171%
Progress:export:31:110 0.609114%
Progress:export:32:110 0.614058%
Progress:export:33:110 0.619001%
Progress:export:34:110 0.623945%
Progress:export:35:110 0.628888%
Progress:export:36:110 0.633831%
Progress:export:37:110 0.638775%
Progress:export:38:110 0.643718%
Progress:export:39:110 0.648662%
Progress:export:40:110 0.653605%
Progress:export:41:110 0.658549%
Progress:export:42:110 0.663492%
Progress:export:43:110 0.668436%
Progress:export:44:110 0.673379%
Progress:export:45:110 0.678323%
Progress:export:46:110 0.683266%
Progress:export:47:110 0.688210%
Progress:export:48:110 0.693153%
Progress:export:49:110 0.698097%
Progress:export:50:110 0.703040%
Progress:export:51:110 0.707984%
Progress:export:52:110 0.712927%
Progress:export:53:110 0.717870%
Progress:export:54:110 0.722814%
Progress:export:55:110 0.727757%
Progress:export:56:110 0.732701%
Progress:export:57:110 0.737644%
Progress:export:58:110 0.742588%
Progress:export:59:110 0.747531%
Progress:export:60:110 0.752475%
Progress:export:61:110 0.757418%
Progress:export:62:110 0.762362%
Progress:export:63:110 0.767305%
Progress:export:64:110 0.772249%
Progress:export:65:110 0.777192%
Progress:export:66:110 0.782136%
Progress:export:67:110 0.787079%
Progress:export:68:110 0.792023%
Progress:export:69:110 0.796966%
Progress:export:70:110 0.801909%
Progress:export:71:110 0.806853%
Progress:export:72:110 0.811796%
Progress:export:73:110 0.816740%
Progress:export:74:110 0.821683%
Progress:export:75:110 0.826627%
Progress:export:76:110 0.831570%
Progress:export:77:110 0.836514%
Progress:export:78:110 0.841457%
Progress:export:79:110 0.846401%
Progress:export:80:110 0.851344%
Progress:export:81:110 0.856288%
Progress:export:82:110 0.861231%
Progress:export:83:110 0.866175%
Progress:export:84:110 0.871118%
Progress:export:85:110 0.876062%
Progress:export:86:110 0.881005%
Progress:export:87:110 0.885948%
Progress:export:88:110 0.890892%
Progress:export:89:110 0.895835%
Progress:export:90:110 0.900779%
Progress:export:91:110 0.905722%
Progress:export:92:110 0.910666%
Progress:export:93:110 0.915609%
Progress:export:94:110 0.920553%
Progress:export:95:110 0.925496%
Progress:export:96:110 0.930440%
Progress:export:97:110 0.935383%
Progress:export:98:110 0.940327%
Progress:export:99:110 0.945270%
Progress:export:100:110 0.950214%
Progress:export:101:110 0.955157%
Progress:export:102:110 0.960101%
Progress:export:103:110 0.965044%
Progress:export:104:110 0.969988%
Progress:export:105:110 0.974931%
Progress:export:106:110 0.979874%
Progress:export:107:110 0.984818%
Progress:export:108:110 0.989761%
Progress:export:109:110 0.994705%
Progress:export:110:110 0.999648%
Progress: export accomplished in 0.953s
Progress:process:1:1 1.000000%
Total time elapsed 1.41s.
Gcode header after slicing:
;FLAVOR:Marlin
;TIME:5694
;Filament used: 5.19905m
;Layer height: 0.2
End of gcode header.
Print time (s): 5694
Print time (hr|min|s): 1h 34m 54s
Filament (mm^3): 12505

Back to ОБТ Erzay 3DLab(Beta)...